Ives 5BB1 Electric Hinge, Heavy Duty, Full Mortise, Ball Bearing

SKU:
IVES 5BB1HW E
Part #:
Model:
IVE1005BB1HW4.5X4.0630TW8
$290.39 - $703.35

(No reviews yet) Write a Review
Adding to cart… The item has been added
California Prop 65 Warning

Product Overview

Ives offers a variety of architectural hinges that will cover any need commercial application while also exceeding code requirements. With tested durability and consistent superior performance, Ives architectural hinges get the job done. Recommended for heavier weight doors (>150 lb). Recommended for high frequency usage (400 cycles per day). Made with four ball bearing assemblies. Recommended for use with a door closer. Packed with fasteners for hollow metal and wood doors. Electrical through-wire provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Each wire is 28 AWG and rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire (TW4) 8 wire (TW8) installations and 12 wire (TW12) installations. All TW4, TW8 and TW12 3 knuckle and 5 knuckle hinges are standard with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices.

Specifications

  • Application
    Recommended for high frequency usage (400 cycles per day)
  • Bearing Type
    Ball Bearing
  • Configuration/
    Connectors
    Allegion Connect 8-pin Connector
  • Corner Type
    Square
  • Device Type
    Electric
  • Door Height
    Under 7'6" require 3 hinges; Over 7'6" require 4 hinges
  • Door Material
    Wood or Hollow Metal
  • Door Thickness
    1-3/4"
  • Door Width
    Up to 36"
  • Duty Weight/Class
    Heavy Duty
  • Electrical Rating
    Each wire is 28 AWG and rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse
  • Grade
    Grade 1
  • Hand
    Non-Handed
  • Height
    4-1/2"
  • Hinge Type
    Full Mortise Hinge
  • Knuckles
    5
  • Pin Type
    Removable
  • Rated Opening Compliant
    Yes
  • Screws
    12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS
  • Series
    Ives Architectural Hinges
  • Standards
    ANSI/BHMA A156.1, ANSI/BHMA 156.7
  • Tip Style
    Standard
  • Type
    Architectural Hinge
  • Unit of Measure
    Each
  • Width
    4"

Customers Also Viewed