LCN 9540 Series Electromechanical Senior Swing Door Operator

SKU:
LCN 9540
Model:
LCN1009542REGLHANDKB36
Was: $5,564.00
Now: $4,256.46

In Stock

(No reviews yet) Write a Review
Adding to cart… The item has been added

Product Overview

The low-energy electromechanical Senior Swing Series operators are LCN's heaviest-duty version for high-abuse and high-traffic areas. The 9540 Senior Swing by LCN is an ADA door operator that is a two-in-one swing door operator. Senior swing operator when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic. The Push 'N Go feature allows pedestrians to walk up to the door and push it open as if it were a manual door. After the door is manually opened approximately 5 degrees, the Push 'N Go feature takes over and continues to open the door - slowly and automatically to the full open position. Power boost adds an additional latching force to ensure secure latching in severe wind or stack conditions.

Warranty Information

2 Years Limited

Specifications

  • ADA Compliant
    Yes
  • Action
    Provides 24V DC output to power card readers, manual actuators and other peripherals
  • Additional Information
    Less than 15 lbs of force to open door manually
  • Application
    Single Door
  • BAA Compliant
    Yes
  • Country of Origin
    USA
  • Degree Hold Open
    90 Deg.
  • Degree Swing
    90 Deg.
  • Depth
    4-1/2" Housing
  • Device Type
    Two-in-One
  • Door Width
    33-48"
  • Duty Weight/Class
    Heavy Duty
  • Electric Options
    High voltage (primary AC input) is protected by replaceable fuse. Low voltage is protected by self-resetting fuses.
  • Fasteners
    Machine Screw Pack
  • Function
    Opens doors automatically or manually
  • Grade
    Grade 1
  • Height
    5-3/4" Housing
  • Hold Open
    Yes
  • Includes
    Standard motor gearbox, Standard control box, 36" Header, Regular Arm, 2-3/4" pivot point
  • Input Current
    120 VAC 60Hz @ 2.5 amps; 240 VAC 50/60 Hz @ 2.5 amps
  • Lights
    LED Indicator
  • Mounting Location
    Push Side
  • Output Current
    24 VDC @ 1 amp (protected by self-resetting thermal fuse)
  • Programmer/
    Programming
    Opening and Closing Time Variable by Adjustments to the Electronic Control Box, Maximum Hold Open Time Adjustable Up to Approximately 32 sec
  • Reveal
    Should Not Exceed 10"(254mm)
  • Series
    9540 Series Automatic Operators
  • Standards
    ANSI A156.19, UL325/228, UL1998, 100 hr Salt Spray
  • Through Bolts
    No
  • Type
    Surface
  • Unit of Measure
    Each
  • Use With
    Frame Head Minimum 1-3/4" (44 mm), Face Frame 6-3/4" (171 mm) Total Operator Clearance
  • Weight
    78

Customers Also Viewed