Bosch Security DS160 Infrared Request to Exit Detector with Sounder

SKU:
BS DS16
Part #:
Model:
DET200DS161
Was: $218.00
Now: $130.80

(No reviews yet) Write a Review
Adding to cart… The item has been added

Product Overview

The DS160 Series Request to Exit Detector provides a passive infrared (PIR), 2.4m x 3m (8 Ft. x 10 Ft.) coverage. With features such as timers, door monitor with sounder alert, and pointable coverage, the DS160 and DS161 have the flexibility to meet the most stringent REX requirements. The exclusive Sequential Logic Input (SLI) provides added security that is not offered in any other REX device. The SLI terminal allows connection of a second device to require sequential detection. This eliminates the possibility that an object that is slid through the door or underneath the door will activate the detector. This input can also be used to lock the sensor if motion is present outside the premises. The sensor can monitor a door contact to allow special control of the internal relay. For example, if the door is opened within the relay time period, the sensor can be programmed to halt the timer. If the door is not opened within a specific time period, the relay can be programmed to deactivate. An integrated sounder can be programmed to activate if the door is left open too long. The sounder volume is fully adjustable to 85 dB. The keycard input allows the sensor relay to be controlled from an external source, such as an access control system or card reader.

Specifications

  • Additional Information
    Radio Frequency Interference Immunity: No Alarm or Setup on Critical Frequencies in the Range from 26-1000 Mhz @ 50 V/m
  • Alarm/Siren
    Volume is fully adjustable to 85 dB
  • Country of Origin
    China
  • Current Draw
    8 mA nominal standby current, 39 mA at 12 VDC in alarm
  • Failure Mode
    Field Selectable, Fail Safe/Fail Secure
  • Function
    Request to Exit
  • Height
    1.8"
  • Length
    6.8"
  • Lights
    LED
  • Material
    High Impact ABS Plastic Enclosure
  • Mounting Location
    Wall or Ceiling
  • Mounting Style
    Surface
  • Operating Temperature
    -20 to 120 deg F; for UL Certificated installations, 32 to 120 deg F)
  • Power
    Hardwired
  • Range
    8ft x 10ft
  • Relay
    Two Form C relay contacts each rated 1 A at 30 VAC or VDC for resistive loads
  • Standards
    ALVY: Access Control Systems Units (UL294)
  • Type
    Passive Infrared (PIR)
  • Unit of Measure
    Each
  • Voltage
    12 VAC or VDC to 30 VAC or VDC
  • Width
    1.8"

Customers Also Viewed