Altronix AL400ULM Multi-Output Power Supply/Charger, 5 Outputs, 12/24VDC@3A

Product Overview

Altronix M Series multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115 VAC/60 Hz input into five (5) individually protected class 2 rated power limited 12 VDC or 24 VDC outputs. Each output will route power to a variety of access control hardware devices including maglocks, electric strikes, magnetic door holders, etc. These outputs will operate in both fail-safe and fail-secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (fire alarm control panel). A form "C" dry output relay enables HVAC shutdown, elevator recall or may be used to trigger auxiliary devices. Fire alarm panel or access control system trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input. Five (5) (auto-resettable) PTC protected outputs, rated @ 2 A. Output relay energizes when unit is triggered (form "C" contact rated 1 A @ 28 VDC). Filtered and electronically regulated output. Short circuit and thermal overload protection. Built-in charger for sealed lead acid or gel type batteries. AC fail supervision (form "C" contacts). Notification trigger is selectable for 30 seconds (factory set) or 6 hours. Low battery supervision (form "C" contacts).